Powering One AP Without Replacing the Switch
You have a working network switch, but the new access point needs power through Ethernet. A suitable injector can add power to that connection. Start with the access point or camera model, then choose the injector around its documented requirements.
Tenda PoE Injector Price in Bangladesh: Two Options
| Model | Type | Best for | Key details | Price (BDT) |
|---|---|---|---|---|
| POE15F | PoE injector | Compatible 802.3af device | 10/100 Mbps; IEEE 802.3af | 1,650 |
| PoE30G-AT | PoE injector | Compatible PoE+ Gigabit device | Gigabit; IEEE 802.3at; up to 30W output | 2,550 |
These are the two Tenda injector models listed here. Amounts are local store prices, not an installation total. Ask for the exact supplied version and package when requesting a quotation.
PoE15F: Check the 100 Mbps Link First
PoE15F is listed at BDT 1,650. Tenda identifies it as a 10/100 Mbps injector for compatible IEEE 802.3af powered devices. It can be shortlisted where both the power requirement and Ethernet rate suit the equipment.
A Fast Ethernet injector can limit a link even when the connected AP has faster wireless capability. If the installation needs more than 100 Mbps through that connection, compare a suitable Gigabit option. The Wi-Fi class printed on the AP does not remove the wired limit.
PoE30G-AT: Gigabit and PoE+
PoE30G-AT is listed at BDT 2,550. Tenda specifies Gigabit Ethernet and IEEE 802.3at support, with up to 30W output at the injector. Match the device requirement to the complete power arrangement; the injector output figure is not the same as guaranteed power at the far end of every cable.
A Gigabit interface does not establish support for a 2.5GbE link. If your AP needs multi-gigabit Ethernet or another PoE standard, choose equipment explicitly supporting those requirements. A higher wireless class alone does not identify the right injector.
The Device Label Matters More Than the RJ45 Shape
Read the powered device documentation for the required PoE method and power. Passive PoE and standards-based PoE are different arrangements. A physically matching Ethernet connector is not enough to establish electrical compatibility.
Use the injector ports as labelled for data input and powered output. Include suitable cabling and follow the exact installation instructions. If the AP is outdoors, plan the complete outdoor cable and protection arrangement separately; the AP location does not establish an outdoor rating for the injector.
What to Send TechMe BD
- Exact AP, camera or other powered-device model.
- Required PoE standard and power demand.
- Required Ethernet link speed and cable route.
- Supplied power lead, accessories and any requested fitting work.
Request an itemised quotation and agree configuration or fitting work separately. Read the Warranty Policy for applicable terms and keep the invoice. The Online Delivery terms explain arrangements and charges. Browse the PoE Injector collection for other listed options.
Tenda Injector Questions
What is the starting Tenda PoE injector price in Bangladesh?
PoE15F is listed at BDT 1,650 at TechMe BD. PoE30G-AT is BDT 2,550; request the current quotation and exact package.
What is the main difference between PoE15F and PoE30G-AT?
PoE15F has a 10/100 Mbps link and 802.3af support. PoE30G-AT provides Gigabit Ethernet and 802.3at support, with up to 30W output at the injector.
Will either injector power every access point?
No. Match the exact AP power method, standard and requirement. Some devices need another power arrangement or Ethernet capability.
Does a Gigabit injector increase my internet package speed?
No. It provides the supported wired link capability. Your service and the complete connection path still determine usable speed.
Contact TechMe BD for the current Tenda PoE injector price in Bangladesh and a quotation matched to your powered device.