Patch Cord Price in Bangladesh: 5 Options to Compare
| Model | Type | Best for | Listed details / exact device match required | Price (BDT) |
|---|---|---|---|---|
| IBEBF | Copper LAN patch cord | Listed Cat6 UTP 1M connection | VENTION IBEBF Cat.6 UTP Patch Cord Cable 1M | 250 |
| IBEBH | Copper LAN patch cord | Listed Cat6 UTP 2M connection | VENTION IBEBH Cat.6 UTP Patch Cord Cable 2M | 250 |
| Cat6 Patch Cord 2 Meter | Copper LAN patch cord | Rosenberger CP61-421-1P2 2M | Rosenberger CP61-421-1P2 2 Meter Cat 6 UTP Patch Cord Grey | 650 |
| 4422-3051AQ | Fiber patch cord | Listed OM3 LC-LC duplex 5M | Safenet OM3 LC-LC Multimode Duplex Fiber Patch Cord 5M | 4422-3051AQ | 850 |
| OTECH SC-SC SM 5M | Fiber patch cord | Listed single-mode SC-SC 5M | OTECH SC-SC 5M Single-Mode Fiber Patch Cable | 100 |
The shortlist combines locally listed copper models and fiber options from the store. It is not a verified national sales ranking. Compare cables within the connection type you need; a fiber lead and an RJ45 LAN cable are different products.
Do You Need a LAN Patch Cord or a Fiber Cable?
Start with the ports on the equipment. A copper LAN patch cord connects compatible RJ45 Ethernet ports. A fiber patch cord connects matching optical interfaces or termination points. The connector types and fiber requirements determine the right optical lead.
A patch cord arrives with terminated ends for a supported connection. It is different from a loose connector or a bulk cable roll.
The lowest priced actual patch cord here is the OTECH SC-SC 5M single-mode listing at BDT 100. Copper and fiber prices vary with length, construction and connector arrangement. Compare the exact supplied model before choosing by price.
Vention and Rosenberger Cat6 Patch Cord Options
Vention IBEBF is listed at BDT 250 for 1M. IBEBH is also BDT 250 for 2M. Both titles identify Cat6 UTP patch cords, so choose the length around your actual route rather than assuming different prices for each length.
The Rosenberger CP61-421-1P2 2M listing is BDT 650. Its store model field is a generic length description, so keep the full part number on the quotation. Similar names and colours do not establish an identical cable specification.
A cable category is one part of the network path. Your computer, switch and other interfaces also need to support the intended data rate. A higher category label alone does not upgrade the broadband package or a slower device port.
Single-Mode, OM3 and LC-LC Fiber Patch Cords
Safenet 4422-3051AQ is listed at BDT 850 as an OM3 LC-LC multimode duplex 5M patch cord. The OTECH SC-SC 5M single-mode entry is BDT 100. These serve different optical connection requirements and should not be selected as interchangeable price alternatives.
Match single-mode or multimode fiber to the equipment and installed link. Then match the connector at each end. LC-LC, SC-SC and LC-SC names describe different end combinations, not a universal optical connection.
The connector polish must match the mating interface at each end. A cable can have different supported end types, but the actual mating connections still need to match. Follow the equipment and cable specifications instead of selecting by connector colour alone.
How to Choose Your Patch Cord
- Identify copper RJ45 or the required optical connection.
- Match fiber mode, connector type and polish where applicable.
- Choose a practical length for the routed connection.
- Check cable category, shielding and jacket requirements for the installation.
- Keep the exact part number and supplied quantity on the quotation.
Length, Cable Routing and Jacket Options
Measure the route between the ports, allowing practical room for connection and cable management. Avoid a taut cable at the connector. Follow the manufacturer bend and handling instructions, especially around fiber jumpers and crowded racks.
Some listings specify LSZH jackets and different cable diameters. Match those details to the site requirements. Jacket wording alone does not establish that every cable meets a particular project or building requirement.
Shielded and unshielded copper cables also belong in a complete installation plan. Use the supported cabling system and equipment requirements. For PoE applications, check suitability across the connection rather than relying on the appearance of an RJ45 plug.
MPO and Breakout Cables Need an Exact Link Plan
The wider selection includes MPO assemblies and breakout cables. Specify fiber count, polarity, connector gender and the intended transceiver arrangement. A matching-looking connector is not enough to establish the required optical mapping.
Some titles include multiple speed labels. The cable title alone does not prove compatibility with every optic at those speeds. Obtain the exact assembly specification and supported device pairing before ordering these specialised links.
Buying from TechMe BD
Request a quotation with the part number, cable length and both connector ends identified. Include any required adapters, cable management and installation work separately. This makes two otherwise similar cable offers easier to compare.
Read the Warranty Policy for applicable terms and retain your invoice details. The Online Delivery terms explain arrangements and charges. Browse the Networking Accessories collection for related installation items.
Frequently Asked Questions
What is the starting patch cord price in Bangladesh?
Actual patch cord listings start at BDT 100 for the OTECH SC-SC 5M single-mode entry. The lower-priced RJ45 connector in this category is a separate component.
What is the difference between a LAN patch cord and a fiber patch cord?
A LAN lead connects compatible copper Ethernet ports, while a fiber cord uses matching optical interfaces. Choose the type required by the equipment at each end.
Are the Vention 1M and 2M cables priced differently here?
IBEBF 1M and IBEBH 2M are both listed at BDT 250. Request the current quotation for your preferred model and length.
Can I use an OM3 patch cord instead of single-mode fiber?
Match the fiber type to the link and optics. OM3 multimode and single-mode leads are different specifications, not automatic substitutes.
Does an MPO cable support every speed in its title?
Compatibility depends on the complete assembly and transceiver arrangement. Specify the required fiber count, polarity, connectors and device pairing before ordering.
Contact TechMe BD for the latest patch cord price in Bangladesh and a quotation matched to your installation.